Yes it will; a truck with air brakes is 100 percent compatible with the Tekonsha Prodigy P3 Trailer Brake Controller # 90195.
The type of brakes your truck has won't matter so long as the circuit that activates the truck's brake wire signal has voltage on it when you press the brakes.
I have added a link below to a video review for you to check out as well of the Tekonsha Prodigy P3 Trailer Brake Controller # 90195. view full answer...
We do have some universal fit hitches that you'd be able to use on your 1999 International Trucks 3800 bus, but you would need to confirm the type of frame and the width of the frame. The Curt # 13703 can fit on box frame, C-channel frame, or I-beam frames between 22" and 72" wide and can be either bolted on or welded to the frame. I really like the durability of the powder coat that Curt uses on their hitches, which helps make sure that it stands up to the elements and resists corrosion.... view full answer...
I don't have any specs to determine fit of the Buyers Products Fabricators Hitch Plate like part # 3371809040 on any one vehicle but you can make an educated guess using the overall dimensions of the plate which for the above are 34-5/8" wide x 15-5/8" tall. You'll need to weld the hitch in place so modifications are to be expected. view full answer...
You raised some great questions.When a trailer hitch like the Curt Class III # 13580 says "Not Rated for Weight Distribution" it means that the hitch cannot be used with any style of weight distribution (WD) system. This could be due to the size of the brackets on the hitch. (In this case, the brackets are very narrow where they mount to the truck frame.) Another reason may be that the manufacturer has tested the hitch with WD and found that either the hitch or the vehicle did not perform... view full answer...
I have another option for you, but the # TIRCV515 you were looking at is only confirmed to fit select International Trucks CV Series trucks and will not fit your MV series truck.
Instead for your 2020 International Trucks MV Series you will need the Timbren Rear Suspension Enhancement System # TRED001 as long as your truck does not have air suspension, which I confirmed with my contact at Timbren. If your truck has air suspension then there is not a suspension enhancement option available. view full answer...
The range of the Curt Echo Mobile brake controller part # C51180 is listed as 50 feet. You shouldn't have any issue with a 33 foot RV. view full answer...
The adjustment holes on the Super Titan Forged Pintle Hook Plate part # RP38186 are 17/32" diameter so they will accept and are designed to be used with 1/2" bolts. It should not matter what brand pintle hook is used as the hole size and spacing are both industry standards. view full answer...
We have confirmed with Roadmaster that the sway bar part # RM-1179-124 that you referenced does fit the 2016 International Trucks Terrastar chassis like what you have on your Nexus Phantom 33SC. view full answer...
The universal wedge included with 5th Airborne Premium 5th Wheel Air Ride King Pin w/ Sidewinder and Turret item # RP34FR may fit but it is better to use the specific wedge kit for each hitch to eliminate any play with the king pin.
For your B&W Companion 5th Wheel Hitch item # BWRVK3600 you will want the Sidewinder Wedge Kit for B&W, Demco, and Husky Fifth Wheel Trailer Hitches item # RP74FR. view full answer...
I'm happy to help you figure out if the Dexstar Conventional Steel Wheel w/ +0.5" Offset - 16" x 6" Rim - 8 on 6-1/2 - Black # AM20766 will fit on your trailer.
In order to determine if it fits you simply need to know your trailer hub's bolt pattern. Since this wheel has an 8 on 6-1/2" bolt pattern, if you measure from the center of one bolt hole to the center of its opposite bolt and get 6-1/2" then this wheel will fit your trailer!
I have added a link to a video review as well as... view full answer...
While there isn't a custom fit trailer hitch for your 2008 International 4400 ambulance, there may be an option for you with a weld-on hitch. It just depends on the width of your frame, and one with the correct drop.
- 7" Tall Brackets, 44" Wide Crosstube: Draw-Tite Ultra Frame Service Body Trailer Hitch Receiver # 41990-07
- 16" Tall Brackets, 44" Wide Crosstube: Draw-Tite Ultra Frame Service Body Trailer Hitch Receiver # 41990-16
I have added a link below to the install instructions... view full answer...
You're looking for the Roadmaster Front Anti-Sway Bar # RM67MR, which is a confirmed fit for your 2022 International MV607 Chassis. As for the shocks, we don't currently carry replacements or enhancements that are compatible with liquid suspension systems.
I recommend reaching out to your local dealer or a mechanic shop to find the correct replacements for your motorhome.
If you're looking for other enhancements we do offer a rear anti-sway bar # RM77MR and the Roadmaster Exact Center... view full answer...
For your application I recommend going with the Thule track mount system as that has the longest bars at 79" which will fit with a current foot pack. You will need tracks and a whole roof rack package. I will have these separated out so that you can choose the best track length for your application. Please keep in mind that the weight capacity of the roof is typically the limiting factor when it comes to load capacity so you'll want to see if you can find out what that is for your 4300... view full answer...
The Super Titan 4000 Weld-On Trailer Hitch part # 38124 is a weld on application and does not come in a bolt on version. All of our heavy duty truck hitches are weld-on but the Buyers Products Class 4 Service Body Long Hitch Receiver part # 3371801055 can be welded or bolted on. It does come with the hardware to bolt it on. The maximum gross trailer weight is 10,000 lbs. view full answer...
The Super Titan 4000 Weld-On Trailer Hitch part # 38124 will fit your 1995 International 4700 Series truck if the frame is approximately 34-1/4" to 34-3/4" which is the standard width of a cab and chassis frame. It is a weld on application so you would need to weld it on yourself or have a professional welder weld it for you. view full answer...
OnSpot Chains are a special tire chain system for snowy weather (pictured below). Basically the sway bar is going to need the same space for mounting as the OnSpot chains so they can't be used together with the # RM-1179-110-00 you were looking at.
If you have OnSpot chains on your 2020 International Trucks DuraStar then you'll want the Roadmaster Rear Anti-Sway Bar # RM-1179-110.
If you don't have OnSpot chains on your 2020 International Trucks DuraStar then you'll want the Roadmaster... view full answer...
We do have a variety of hitch plates available that you can install on your 2021 International MV607 Crew Cab. Some of them are custom fits that require fabrication, like the 5/8" x 34-1/2" x 22-1/2" # 3371809043, and others are like the Hitch Plate Bumper # 3371809055.
I'm not 100% sure what you'll be needing since we don't have any custom fit options for your truck but I'm linking our selection for you to filter through so you can find the one you believe will fit your vehicle best. view full answer...
We can get your International 4900 set up with a 7-way and brake controller, and to do that you'll need to start with a 4-way, which will activate your trailer's lighting functions, and you'll then plug that into the 7-way. For the universal harnesses and brake controller, use the following:
- Tail Light Converter with 4-Pole Flat Trailer Connector # C59236
- Universal Installation Kit for Trailer Brake Controller # ETBC7
- Prodigy P3 Trailer Brake Controller # 90195
The # ETBC7 has the... view full answer...
While the WeatherTech sunshade # WT87QV is not custom fit, it will be a very good fit for your 2019 Nexus Ghost. The windshield cover is 69" long, so you may have 2 inches or so not covered on each side. The side window covers should fit like a glove. All in all I think this will be your best bet for a sun shade as this is the largest windshield cover we offer. This is more of a universal design that is made for vehicles like yours. view full answer...
The Hayes Air Actuated Brake Control, # HA100400C, will work on your 2002 International 4400 truck as long as you have an air line connection and trailer connector to plug your trailer up to your truck.
You will need to wire the three wires coming out of the Warner controller as followed: BLACK is to 12-volt power, the RED will wire to the your brake light switch on your brake pedal, and the BLUE wire will wire into the 7-way connector to run the brake signal to the trailer when it is... view full answer...